Referencia

Designación / Descripción

Ensayo acreditado

Normas de referencia

Producto / Material

Observaciones

ACL.01

Determination of the airborne sound reduction index Rw

✔

ISO 10140-1:2016; ISO 10140-2:2010; ISO 10140-4:2010; ISO 717-1:2013

Building elements

Gama: Rw≤72 dB

ACL.02

Measurement of sound absorption in a reverberation room

✔

NP EN ISO 354:2007

Building elements

ACL.03

Determination of the impact sound insulation index, Ln,w

✔

ISO 10140-3:2010; ISO 10140-3:2010/Amd 1:2015; ISO 10140-4:2010; ISO 717-2:2013

Building elements

Gama: Ln,w≥ 25 dB

ACL.05

Laboratory measurement of the reduction of the transmitted impact noise by floor coverings, ∆IIC

ASTM E2179-03; ASTM E492-04; ASTM E989-89

Building elements

ACL.06

Measurement of the reduction of the transmitted impact noise ∆Lw by floor coverings

✔

ISO 10140-1:2016; ISO 10140-3:2010; ISO 10140-3:2010/Amd 1:2015; ISO 10140-4:2010; EN ISO 717-2:2013

Building elements

Gama: ΔLW≤50 dB

ACL.07

Determination of airflow resistance of materials for acoustical applications

✔

ISO 9053:1991

Resilient materials for acoustical applications

ACL.09

Laboratory measurement of the flanking transmission of airborne between adjoining rooms Dn,f,w

ISO 10848-1; ISO 10848-2

ACL.10

Laboratory measurement of the flanking transmission of impact sound between adjoining rooms Ln,f,w

ISO 10848-1; ISO 10848-2

ACL.11

Determination of sound absorption coefficient in impedance tubes by transfer-function method

✔

EN ISO 10534-2:2001

Productos de construcción

Gama: 100 Hz a 6300 Hz

ACL.13

Determinação da perda por transmissão sonora

procedimiento interno

ARG.10

Determination, in-situ, of adhesive strength of hardened rendering and plastering mortars on substrates

✔

ARG.10.IE.01 (v4 Mar/2017) (EN 1015-12:2016)

Revestimentos

OMC.19

Determination of the burning behaviour using a radiant heat source of floorings

✔

EN ISO 9239-1:2010

Floorings

OMH.02

Determination of thermal resistance by means of guarded hot plate

✔

EN 12664:2001, ISO 8302:1991 (except Method A for granular materials)

Dry and moist construction products of medium and low thermal resistance

OMH.04

Determination of the dimensional variation of specimens

Procedimiento interno OMH.04.IE.01

OMH.05

Shear test of specimens

Procedimiento interno OMH.05.IE.01

OMH.08

Determination of freeze-thaw resistance of clay pavers

NP EN 1344

Clay pavers

PNT.01

Determination of resistance to ageing of natural stone by thermal shock

✔

EN 14066:2013

Natural stone

PNT.02

Determination of frost resistance of natural stone

EN 12371

Natural stone

PNT.03

Determination of the abrasion resistance of natural stone

✔

NP EN 14157:2007 (Método A)

Natural stone

PNT.04

Determination of real density and apparent density, and of total and open porosity of natural stone

✔

NP EN 1936:2008

Natural stone

PNT.05

Determination of water absorption at atmospheric pressure of natural stone

✔

NP EN 13755:2008

Natural stone

PNT.06

Determination of mechanical strength of natural stone after freeze-thaw test

NP EN 12371, NP EN 1926

Natural stone

PNT.07

Determination of flexural strength under constant moment of natural stone

✔

EN 13161:2008

Natural stone

PNT.08

Determination of uniaxial compressive strength of natural stone

✔

NP EN 1926:2008

Natural stone

PNT.09

Determination of flexural strength of natural stone under concentrated load

✔

NP EN 12372:2008

Natural stone

PNT.10

Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)

✔

NP EN 14146:2006 (Método 5.2)

Natural Stone

PNT.11

Determination of the slip resistance of natural stone by means of the pendulum tester

✔

NP EN 14231:2006

Natural stone

PNT.12

Determination of water absorption coefficient of natural stone by capillarity

✔

NP EN 1925:2000

Natural Stone

REV.01

Mechanical characterization of the supports of glass plates that constitute the coating of the building: Tensile strength test

Procedimiento interno REV.01.IE.01

Supports of glass plates

REV.02

Mechanical characterization of the supports of glass plates that constitute the coating of the building: Compression test

Procedimiento interno REV.02.IE.01

Supports of glass plates

REV.03

Mechanical characterization of the supports of glass plates that constitute the coating of the building: Shear test

Procedimiento interno REV.03.IE.01

Supports of glass plates

REV.04

Mechanical characterization of the supports of glass plates that constitute the coating of the building: Bending test

Procedimiento interno REV.04.IE.01

Supports of glass plates

REV.05

Mechanical characterization of glass plates placed in the front elevational: Transverse load test

Procedimiento interno REV.05.IE.01

Glass plates

REV.06

Determination of film thickness of paints and varnishes

✔

NP EN ISO 2808:2011 (Método 7C y Método 7D)

Paints and varnishes

Gama (Método D): 12 µm a 1,5 mm

REV.07

Salt spary tests of paints and varnishes in artificial atmospheres

EN ISO 9227

Paints and varnishes

REV.08

Pull-off test for adhesion of paints and varnishes

NP EN ISO 4624

Paints and varnishes

REV.09

Cross-cut test of paints and varnishes

EN ISO 2409

Paints and varnishes

REV.10

Determination of resistance to humidity of paints and varnishes by continuous condensation

NP EN ISO 6270-1

Paints and varnishes