Referencia

Designación / Descripción

Ensayo acreditado

Normas de referencia

Producto / Material

Observaciones

ACL.01

Determination of the airborne sound reduction index Rw

✔

ISO 10140-1:2016; ISO 10140-2:2010; ISO 10140-4:2010; ISO 717-1:2013

Building elements

Gama: Rw≤72 dB

ACL.02

Measurement of sound absorption in a reverberation room

✔

NP EN ISO 354:2007

Building elements

ACL.03

Determination of the impact sound insulation index, Ln,w

✔

ISO 10140-3:2010; ISO 10140-3:2010/Amd 1:2015; ISO 10140-4:2010; ISO 717-2:2013

Building elements

Gama: Ln,w≥ 25 dB

ACL.05

Laboratory measurement of the reduction of the transmitted impact noise by floor coverings, ∆IIC

ASTM E2179-03; ASTM E492-04; ASTM E989-89

Building elements

ACL.06

Measurement of the reduction of the transmitted impact noise ∆Lw by floor coverings

✔

ISO 10140-1:2016; ISO 10140-3:2010; ISO 10140-3:2010/Amd 1:2015; ISO 10140-4:2010; EN ISO 717-2:2013

Building elements

Gama: ΔLW≤50 dB

ACO.01

Determination of deviation from nominal mass per metre of steel bars for the reinforcement of concrete

✔

ISO 15630-1:2010 (Sección 12)

steel bars for the reinforcement of concrete

ACO.02

Determination of geometrical characteristics of ribbed steel bars for the reinforcement of concrete

✔

ISO 15630-1:2010 (Secciones 10 and 11)

steel bars for the reinforcement of concrete

ACO.03

Tensile test of steel bars for the reinforcement of concrete

✔

ISO 15630-1:2010 (Sección 5), ISO 6892-1:2016

steel bars for the reinforcement of concrete

ACO.04

Verification of the dimensions of steel bars with circular cross section for the reinforcement of concrete

EN 10080

steel bars with circular cross section for the reinforcement of concrete

ACO.08

Bend test of steel bars for the reinforcement of concrete

✔

EN ISO 15630-1:2010 (Sección 6)

steel bars for the reinforcement of concrete

hasta 12 mm de diámetro

ACO.09

Rebend test of steel bars for the reinforcement of concrete

✔

EN ISO 15630-1:2010 (Sección 7)

steel bars for the reinforcement of concrete

hasta 32 mm de diámetro

ACO.11

Determination of the weld shear force of welded wire reinforcement

✔

ISO 15630-2:2010 (Sección 7)

Welded wire reinforcement

AGR.20

Determination of drying shrinkage of aggregates

✔

EN 1367-4:2008

Aggregates

ARG.13

Measurement of bond strength by pull-off

✔

EN 1542:1999

Products and systems for protection and repair of concrete structures

ARG.14

Determination of compressive strength

✔

EN 12190:1998

Products and systems for protection and repair of concrete structures

ARG.15

Determination of elasticity modulus in compression

✔

EN 13412: 2006 Methods 1 and 2

Products and systems for protection and repair of concrete structures

ARG.16

Determination of resistance of capillary absorption

✔

EN 13057:2002

Products and systems for protection and repair of concrete structures

ARG.17

Determination of shrinkage and expansion

✔

EN 12617-4:2002

Products and systems for protection and repair of concrete structures

BET.01

Determination of compressive strength of hardened concrete specimens

✔

NP EN 12390-3:2011

hardened concrete specimens

BET.02

Taking, examining and testing in compression of concrete cored specimens

✔

NP EN 12504-1:2009

Concrete cored specimens

BET.03

Determination of rebound number of concrete in structures

EN 12504-2

Concrete

BET.04

Determination of compressive strength of hardened concrete specimens

LNEC E 226

Hardened concrete specimens

BET.05

Flow table test of fresh concrete

NP EN 12350-5

Fresh concrete

BET.06

Slump-test of fresh concrete

NP EN 12350-2

Fresh concrete

BET.07

Vebe test

✔

EN 12350-3:2009

Fresh concrete

BET.08

Interpretation of identity test results in specimens of concrete

NP EN 206-1

Specimens of concrete

BET.09

Determination of tensile splitting strength of hardened concrete specimens

NP EN 12390-6

Hardened concrete specimens

BET.10

Determination of density of hardened concrete

✔

NP EN 12390-7:2009

Hardened concrete

BET.11

Determination of modulus of elasticity in compression

DIN 1048-5

BET.12

Determination of flexural strength of hardened concrete specimens

✔

NP EN 12390-5:2009

Hardened concrete specimens

BET.13

Determination of shrinkage and expansion of concrete

LNEC E 398:1993

Concreto

BET.14

Determination of the carbonation depth of concrete

Procedimiento interno según la norma EN 13295

BET.16

Fluidity Test of grout for prestressing tendons by cone method

✔

NP EN 445:2008

Grout for prestressing tendons

BET.17

Determination of bleeding and volume change of grout for prestressing tendons - Wick-induced test

✔

NP EN 445:2008

Grout for prestressing tendons

BET.18

Determination of energy absorption capacity of fibre reinforced slab specimens

NP EN 14488-5

Fibre reinforced slab specimens

BET.19

Determination of depth of penetration of water under pressure of hardened concrete specimens

NP EN 12390-8

Hardened concrete specimens

BET.21

Determination of tensile strength by bending of fiber-reinforced concrete

✔

EN 14651:2005+A1:2007

Hardened concrete

OMC.22

Determination of tensile strength and modulus of elasticity of steel fiber for concrete

✔

EN 14889-1:2006 (Sections 5.3 e 5.4)

Fibres for concrete

OMC.23

Determination of tensile strength and modulus of elasticity of steel fiber for concrete

✔

EN 14889-2:2006 (Section 5.4.2 and 5.5)

Fibres for concrete

OMH.02

Determination of thermal resistance by means of guarded hot plate

✔

EN 12664:2001, ISO 8302:1991 (except Method A for granular materials)

Dry and moist construction products of medium and low thermal resistance

OMH.06

Determination of pore size distribution and porosimetry of solid materials by mercury porosimetry

ISO 15901-1:2005, ISO 15901-1:2005/Cor1:2007

Solid materials

OMH.08

Determination of freeze-thaw resistance of clay pavers

NP EN 1344

Clay pavers

OMH.13

Determination of hygroscopic sorption properties of building materials and products

EN ISO 12571

building materials and products

OMH.14

Determination of water vapour transmission properties of building materials and products

EN ISO 12572

Building materials and products

s/ ref.

Método de ensaio padrão para a determinação da condutividade elétrica de betão endurecido.

ASTM C1760 -12

Betão.

VBR.03

Low Strain Impact Integrity Testing of Deep Foundations

ASTM D 5882-07

Deep Foundations

VBR.04

Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

ASTM D 6760-16

Concrete Deep Foundations